Fisher High Turn Low Pressure Regulator R622

Overview

Basic Info.

Model NO.	R622-1732-93105
Condition	New
Certification	ISO, CE
Output Pressure	2.28-3.30kpa
Weight	About 2kg
After Warranty Service	Video Technical Support
Application/Usage	Gas Burners Industrial Accessories
Flow	20kg/H
Brand	Fisher
Cliber	DN15
Inlet Pressure	16bar
Model	R622-1732-93105
Name	Pressure Reducing Regulator Valve
Transport Package	Carton
Specification	22*15*16cm
Trademark	Fisher
Origin	USA
HS Code	8481100090
Production Capacity	1000

Product Description

Fisher High Turn Low Pressure Regulator R622-1732-93105 Gas Pressure Reducing Valve Burner Pressure Regulating Valve

Product Description

Introduction:Type R622 direct-operated, spring-loaded regulatorsprovide economical pressure reducing control ina variety of residential,commercial, and industrial applications. These regulators can be used withnatural, manufactured, or propane gases and have thesame inlet and outlet pressure capabilities.

FEATURES

American FISHER oven pressure reducing valve (gas pressure regulator) gas oven pressure reducing valve, Fisher pressure reducing valve Economical American (high turn bottom) FISHER R622-18/A7 pressure reducing valve, single stage pressure regulating, 1/2~3/4 port.1. Economical decompression control design, suitable for residential areas, commercial, industrial and other occasions;2. It is especially suitable for direct combustion equipment, and can be used for natural gas, artificial gas, liquefied petroleum gas, air and other gases;3. Accurate pressure regulation, sensitive closing, simple pressure setting, integrated overpressure, pressure loss cut-off and safety release device to ensure user safety, can be installed in any position;4. Temperature: -29°~66°C;5. Accuracy: ±2.5%.Principle of Operation
Refer to Figure 2. When downstream demanddecreases, the pressure under the diaphragmincreases. This pressure overcomes the regulatorsetting (which is set by the control spring). Throughthe action of the pusher post assembly, lever, andvalve stem, the valve disk moves closer to the orificeand reduces gas flow. If demand downstreamincreases, pressure under the diaphragm decreases.Spring force pushes the pusher post assemblydownward and the valve disk moves away fromthe orifice allowing flow through the body to thedownstream system. Type R622 regulators include anintemal relief valve for overpressure protection.Installation.Type R622 regulator may be installed in any position.However, the spring case vent should be pointeddownward. If gas escapingthrough the Type R622internal relief valve could constitute a hazard, thesnrind case vent must be piped to a location wnerepIig .Uase vdn Trust e ppdu aocaudrr wiidlescaping gas will not be hazardous. If the ventedgas will be piped to another location,obstruction-freetubing or piping at least equal to the vent, and the endof the vent pipe must be protected from anything thatmight clog it. PRODUCT SPECIFICATIONS

Brand	Fisher
Model	R622-1732-93105
Cliber	DN 15
Flow	20kg/h
Outlet power	2.28-3.3Kpa
Inlet pressure	16bar
Usage	Gas Burner Parts
After Warranty Service	Video technical support

Detailed Photos

Fisher High Turn Low Pressure Regulator R622-1732-93105 Gas Pressure Reducing Valve Burner Pressure Regulating Valve

Recommend Products

Fisher High Turn Low Pressure Regulator R622-1732-93105 Gas Pressure Reducing Valve Burner Pressure Regulating Valve